Surge Protection Devices and Transient Voltage Surge Suppressors (TVSS)
These parallel, DIN-rail mountable, terminal connected devices include 1-pole, 2-pole and 4-pole models with up to 80,000 amps surge protection. They are also used in conjunction with the Multi 9 family of circuit breaker and supplementary protector products to provide a uniform solution for your application. Click here for more information.
For branch panel and equipment protection. Surge suppression protection with the added benefits of noise filtration capabilities in a compact, hardwired package for protection from surges up to 40,000 amps on single-phase power systems. Click here for more information.
For branch panel and equipment protection. Available for three-phase power systems up to 600V, the XW is a hardwired TVSS capable of withstanding surges as high as 100,000 amps. The XW comes standard in a Type 1 enclosure with status lights, audible alarm and dry contacts.
Click here for more information.
Surgelogic™
LC Surge Protective Devices
For equipment protection. A hybrid device (surge suppression and noise
filtration) with up to 40,000 amps surge protection and -75dB of noise
filtration; ideal for custom control and other applications with microprocessors,
PLCs and motion control. Single Phase - 120V.
Click
here for more information.
SDSA Secondary
Surge Arresters
For branch panel protection. Designed to protect against lightning and
high current such as antennas and parking lot lighting systems. These
devices may also be used for surge protection of irrigation pumps, oil
pumps and motors operating below 600V. SDSA1175 - Single Phase, 120/240.
SDSA3650 - 3 phase, 120/208, 277/480, 347/600.
Click
here for more information.
For branch panel protection. Specifically designed for QO or Homeline load centers, these SPDs easily plug into place for a secure fit, providing surge protection up to 40,000 amps. Single phase, 120/240. QO will work with NQOD panels. Click here for more information.
This exclusive Square D whole-house surge protector installs externally to any load center, providing comprehensive protection for telephone wiring, coax cable, and ac branch circuit wiring. Click here for more information.
Modular, non-modular and nipple mounted devices are for use at service entrance and branch panel locations. The EMA, EBA and HWA Series products provide a complete line of application solutions and meet the requirements of ANSI/IEEE C62.41and C62.45, and UL 1449 Second Edition. Peak surge current ratings per phase range from 50kA to 480kA. All units have a Short Circuit Rating of 200kA.
Click here for more information.
For service entrance and branch panel protection. The I-Line Plug-On Unit is a high-performance modular surge protective device based on the IMA TVSS platform. It plugs easily onto the bus stack of an I-Line interior in Panelboards, Switchboards, Modular Panelboard Systems and Integrated Power Centers. These units are available factory assembled, or individually for retrofit applications. Peak surge current ratings per phase range from 120kA to 240kA. Click here for more information.
For service entrance and branch panel protection. The QMB TVSS unit is a high-performance modular surge protective device based on the IMA TVSS platform. They easily plug onto the bus stack of a QMB Panelboard or Switchboard. These units are available factory assembled or individually for retrofit applications. Peak surge current ratings per phase range from 120kA to 240kA. Click here for more information.
For service entrance and branch panel protection. The Busway TVSS unit is a high-performance modular surge protective device based on the IMA TVSS platform. They plug easily onto I-Line or I-Line II Busway. These units are available with a factory Busway order, or individually for retrofit applications. Peak surge current ratings per phase range from 120kA to 240kA. Click here for more information.
For service entrance and branch panel protection. The MCC TVSS unit is a high-performance modular surge protective device based on the IMA TVSS platform. They plug easily Model 6 Motor Control Centers. These units are available factory assembled or individually for retrofit applications. . Peak surge current ratings per phase range from 120kA to 240kA. Two units can be used together to achieve 320kA or 480kA peak surge current rating per phase. Click here for more information.