indmtrsocketspage

Individual Meter Sockets

Get more info . . .
Technical Data
CAD Drawings
On-Line Catalog
Specifications
(CSI Standards)
Competitive Cross Reference
Metering Equipment

Individual Meter Sockets
Square D individual meter sockets have provisions to feed a downstream main lug load center (with a maximum of 6 service disconnects), main breaker load center, or an individually enclosed service disconnect. 400 ampere, studs only units have provisions for mounting dual load side lugs to feed two downstream main breaker load centers or two individually enclosed disconnects.

Ringless type meter sockets

10,000 RMS Symmetrical Amperes Short Circuit Current Rating (or higher with utility approval).
UL Listed, NEMA Type 3R enclosure.
Units supplied with bonded neutral.
Units supplied with Hub Opening in Top endwall require the use of a Bolt-On Hub, or Closing Plate.
Units supplied with Solid Top are for Underground Feed only

Ring type meter sockets

10,000 RMS Symmetrical Amperes Short Circuit Current Rating (or higher with utility approval).
UL Listed, NEMA Type 3R enclosure.
Units supplied with bonded neutral.
Units supplied with Hub Opening in Top endwall require the use of a Bolt-On Hub, or Closing Plate.

Single phase ringless type horizontal ganged meter sockets

10,000 RMS Symmetrical Amperes short circuit current rating (or higher with utility approval)
UL Listed, NEMA Type 3R enclosure
Supplied with ground lugs
Supplied with hub opening in top endwall, requires the use of a Bolt-On Hub, or Closing Plate